STEM & Educational Toys

Ministry Briefs Industry on Revised Mandatory Toy Safety Standards

Global Toy Standards & Trends Analyst
Updated :Nov 19, 2026
Views:
Ministry Briefs Industry on Revised Mandatory Toy Safety Standards

On November 19, 2026, the Ministry of Industry and Information Technology held a press conference on revisions to the mandatory GB 6675 Toy Safety standards, which took effect on November 1. The revisions introduce limits covering 10 categories of hazardous substances and strengthen safety provisions for newer products, including AI toys, popular squishy toys and crystal slime. Manufacturers, material suppliers, buyers and testing providers may need to reassess how product specifications and supporting evidence are aligned with the standards.

What the press conference confirmed about GB 6675

The ministry used the November 19 press conference to explain the revision of the GB 6675 series of mandatory national standards for toy safety. The revised standards had formally taken effect on November 1, 2026.

According to the information provided, the revisions add limits for 10 categories of hazardous substances, including formaldehyde and total volatile organic compounds, or TVOC. They also strengthen safety provisions for AI toys, popular squishy toys and crystal slime. The revised standards raise product quality and safety requirements across the toy sector and support an upgrade in industry compliance.

Ministry Briefs Industry on Revised Mandatory Toy Safety Standards

Where the revised standards may affect the supply chain

Product design and material selection

From an industry perspective, the added substance limits may require manufacturers to examine more than the finished appearance or intended use of a toy. Material composition and the consistency of inputs may become more prominent considerations when companies review designs and select suppliers. The practical implications will depend on the products and materials covered by the detailed provisions of the standards.

For squishy toys and crystal slime, analysis suggests that producers may want to pay particular attention to the relationship between material choices, product formulations and the applicable safety provisions. A change proposed to address one concern would still need to be assessed against all relevant requirements. The information provided does not specify individual substance limits, testing procedures or acceptable materials, so those details should be verified before a product decision is finalized.

For AI toys, the confirmed change is that safety provisions have been strengthened for this product category. The input does not identify the specific features or risks addressed. Manufacturers and product developers may therefore need to review the actual standards before deciding which design, documentation or testing changes are relevant to a particular toy.

Purchasing and supplier coordination

Buyers and suppliers may see the revised standards affect how product requirements are communicated. Analysis suggests that a buyer specifying a toy or its components may need to check whether existing purchasing documents adequately identify the applicable safety requirements. Suppliers, in turn, may be asked to provide information that helps customers assess materials and finished products.

Such requests could affect the timing of supplier selection or product approval if additional verification is needed. This is a planning consideration rather than a confirmed delay. The information supplied does not establish a prescribed document package, a new supplier qualification system or a particular procedure for accepting evidence.

Testing, product release and delivery

The addition of substance limits may lead manufacturers and buyers to reconsider the scope of product testing and the evidence used to support release decisions. Testing providers may also need to assess what services are relevant once they have reviewed the detailed standards and applicable methods. The input does not identify test methods, laboratories or certification arrangements.

For distributors and trade businesses, the main potential issue is whether product information received from upstream partners is sufficient for their own purchasing and delivery decisions. Businesses handling affected toys may benefit from clarifying product specifications and evidence before committing to a delivery schedule. Whether any particular shipment needs further testing, documentation or other action cannot be determined from the event summary alone.

Turning the standard into product-level decisions

Identify the products and provisions that apply

A practical first step is to map the company's toy range against the revised GB 6675 series, paying particular attention to AI toys, squishy toys and crystal slime where relevant. Businesses can then review the detailed provisions for each product rather than assume that every new requirement applies in the same way across the range.

This review could cover products in design, current purchasing plans and goods awaiting delivery. For each product, teams may find it useful to record which version of the applicable requirements they have reviewed and which questions remain open. The event summary confirms the implementation date but does not describe transitional arrangements, treatment of existing inventory or other implementation details; those points need separate verification.

Check substance information and test evidence

Because formaldehyde and TVOC are named among the added limits, companies may wish to compare available material information and test reports with the detailed provisions applicable to their products. The other categories, their limits and the relevant test methods are not listed in the input and should be confirmed in the standard documents.

Where existing evidence does not clearly address a relevant provision, a company could consult its suppliers or a qualified testing provider about an appropriate assessment. It should also check whether the evidence relates to the product and materials actually being purchased or delivered. These are suggested review steps; the provided information does not establish a specific testing frequency or documentation format.

Align purchasing documents and delivery plans

Manufacturers and buyers may want to revisit product specifications, supplier communications and acceptance criteria after identifying the applicable provisions. Clear descriptions of the toy, its relevant materials and the evidence expected from each party can help make unresolved questions visible before an order is finalized.

Where a material substitution or product redesign is being considered, analysis suggests allowing time to verify the revised product against all applicable requirements. Companies could also review delivery plans if additional information or testing might be needed. Any adjustment should be based on the actual product and commercial arrangements; the press conference summary does not confirm a general change to delivery periods.

Verify certification and official implementation details

The supplied information does not say whether the revision changes any certification scheme, certificate, application process or enforcement procedure. Businesses that rely on certification as part of their product approval or purchasing process should therefore verify the relevant position through authoritative materials and the appropriate service providers before changing their procedures.

Further clarification may also be needed on the scope of the new provisions and how they are applied to particular products. Companies can track official publications and retain a record of unresolved interpretation questions, especially where purchasing or release decisions depend on them. This is a precaution for implementation planning, not evidence that additional rules have already been issued.

A standard in force, with practical details to verify

At this stage, the event is best understood as an explanation of a rule change that has already taken effect. The November 19 press conference followed the November 1 implementation date given in the input. It should not be treated as a further announcement of a separate effective date or as confirmation of implementation details that the summary does not provide.

From an editorial perspective, the key issue for the industry is how the broad changes translate into decisions for individual toys. The added substance limits and strengthened provisions for newer product types provide clear areas for review, but their application depends on the detailed standard text. Subsequent official explanations, testing and certification guidance, purchasing requirements and feedback from businesses may help clarify practical questions.

Market feedback may also indicate where suppliers and buyers encounter difficulties obtaining consistent product information. That is an area to observe, not an outcome established by the press conference summary. The same caution applies to potential changes in costs, delivery times or trade: the input provides no evidence from which to quantify them.

Putting the revision in context

The revised GB 6675 series raises the safety requirements relevant to toys and explicitly addresses substances and newer product types identified in the press conference. For businesses, the immediate analytical task is to connect those confirmed changes to the products, materials and purchasing arrangements they actually handle.

A measured response is to treat the standards as implemented while verifying the detailed provisions and any relevant implementation guidance. Product-level checks and coordination across the supply chain may help companies identify necessary action, but the information supplied does not support a prediction of uniform effects across every product or business.

Basis for this report and points to follow

This article is based on the user-provided news title, event date and event summary. No specific official source link was provided in the input, so the underlying standard documents and relevant official information still require verification. Useful source types for that follow-up include official announcements, regulator publications, standard documents, industry association information and authoritative media reports.

Further monitoring should focus on detailed provisions, any applicable certification or implementation guidance, changes to purchasing documents, trade practices where relevant, and feedback from companies applying the revised standards. References to possible business effects in this article are analysis, not confirmed execution outcomes.

Related Intelligence